Coherent Bioray Compact Fiber Ready Laser 780nm 100mW Adjustable Focus SMA

Description

This auction is for a Coherent BioRay 780nm Compact Laser System.  (780nm 100 mW)
These are compact lasers which include a laser diode driver and rs-232 interface for monitoring and control of the laser.
This particular laser has a wavelength of 780nm.  Measured output was 99.87 mW before he fiber launcher
Laser has 3898 hours.
This model has the sma fiber launch option.  You can remove this to have a free space beam.
Tem00 mode.  Adjustable focus.
I am including the rst connector so you can make your own power/data cable.  If you need help let me know.
The laser and controller can be stacked on top of each other for a compact form.
These run off a 5V to 24V dc power supply.  The 'modulation' input is used to control laser output power as well as modulation.
I have these in other wavelengths such as 405nm, 450nm, 640nm, 647nm, 785nm.  Please ask if interested.
I will include a pdf copy of the user manual.  I will email you the control software 'Coherent Connection'
Please ask if you have any questions.
Buyer to pay shipping.
Thanks for looking!
BioRay is Coherent’s compact high-performance laser for Life Science applications with an elliptical beam output with a user-adjustable beam divergence (adjustable focus). With BioRay, the elliptical beam is easier to integrate into today’s particle measuring systems. With RS-232 control the laser power is adjustable as well as on-board diagnostics for operating hours, diode current, output power, temperature, and more.
Select StingRay and BioRay also include the μFocus and Fiber-Ready (FR) versions.
FEATURES
• 405 nm to 830 nm
• Power up to 200 mW
• User adjustable focus
• Pointing stability <10 μrad/°C
• Analog or digital modulation
• Microprocessor controlled
• Onboard diagnostics monitor
• RS-232 control option
• Power supply range: 5 to 24 VDC
• ESD protection, over-temperature protection, and reverse polarity protection
• Optional fiber-ready version
StingRay and BioRay
Datasheet
LASER OUTPUT SPECIFICATIONS
Spatial Mode
TEM
00
(Single Transverse Electric Mode)
Beam Quality, M
2
(ModeMaster with 90/10 Clip Level)
<1.5
Pointing Stability over Temperature (μrad/°C)
<10
Beam Angle (boresight) (mrad)
<3
RMS Noise (%) (20 Hz to 20 MHz)
<0.5
Peak-to-Peak Noise (%) (20 Hz to 20 MHz)
<1
Long Term Power Stability (%) (over 8 hours and ±3°C)
<2
Warm-up Time (minutes)
<5
LASER ELECTRICAL SPECIFICATIONS
Operating Voltage (V DC)
+5 to +24 (recommend 12 VDC for best efficiency)
1
Operating Current (mA) (maximum at 25°C)
200
Power-on Delay (seconds) (if enabled)
5
Power Consumption (W)
<5
ESD Protection
N61326-1 (8 kV Air Discharge, 4 kV Contact Discharge
LASER MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
-10 to 50°C (except 450 nm, 520 nm, and 525 nm with 10°C to 40°C)
Non-Operating (storage) Temperature
-20 to 60°C
Weight (grams) (standard model)
<70
Diameter (mm)
19.05
Material
Aluminum 6061 T1