Danville Microetcher II Type Dental Polishing Sandblaster M4 KAVO Multiflex TINY

Description

Danville Microetcher II Type Dental Sandblaster Polisher TINY Fit KAVO Multiflex
Products Description
TINY polisher makes the surface of porcelain, metal and composite materials Micro-roughened by the alumina powder
before pasting. It improves its adhesive strength.
Installation
Plug your Kavo quick coupling directly to this unit, the installation is finished.
caution: You must check if there is remaining water in the handpiece cable before installation. If there is, you must dry it
firstly, then install it.
Recommended powder
We recommend a particle size of 20 to 80 μm high purity powder (99%+).
It's easy for the powder to absorb moisture from the air , It would cause agglomeration, resulting in performance
degradation. After install the powder, you should closed the cover of the bottle immediately to make sure its tight cover.
The dry powder should flow freely, the wet powder does not flow easily or lumps.
Extraoral application
For surface cleaning and micro-roughening treatment before pasting
metal/Porcelain
Fiber post
Inlay/Onlays
maryland bridge
Orthodontic bracket
removing the cement in the original adhesive layer before second pasting
Cast metal prosthesis defect detection
Application in oral
In the repair treatment, micro roughen surface of porcelain or composite.
Package:
Handpiece with Nozzle * 1pc
Powder Jar * 1pc
Brush * 1pc
( 4 Hole TINY Sandblaster does not have brush )
Models to choose:
Black Color TINY
Silver Color TINY
302PQ Kavo Multiflex type Coupling
Black Color TINY & 302PQ Coupling
Silver Color TINY
& 302PQ Coupling
4 Hole TINY Sandblaster
Notes:
The actual color is like Silver, but due to light input and reflection and usual photograph place, the color in photos are a bit different from its actual color. Thank u !