-40%
Micro RGB Laser Module Multiple Wavelengths Three Laser Beams Red Green Blue
Micro RGB Laser Module Multiple Wavelengths Three Laser Beams Red Green Blue
Micro RGB Laser Module Multiple Wavelengths Three Laser Beams Red Green Blue

Micro RGB Laser Module Multiple Wavelengths Three Laser Beams Red Green Blue

$ 350.06

Availability: 100 in stock
  • Return shipping will be paid by: Buyer
  • Condition: New
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Brand: Opt Lasers
  • Refund will be given as: Money Back
  • MPN: 001311
  • Country/Region of Manufacture: Poland

    Description

    300 mW Micro RGB Laser Module
    Product description
    Compact and lightweight free-space laser module with multiple wavelengths.
    Technical Data
    Beam Height (Measured from Base)
    18,5 mm
    Dimensions
    44 x 39 x 27 mm
    Divergence Full Angle
    0,8 mRad
    Driver Dimensions
    62 x 21 mm
    Input Voltage
    7 - 16 V
    Max. Modulation Frequency
    100 kHz
    Max. Power Dissipation
    2.5 W
    Modulation Input Voltage Range
    0 - 5 V
    Modulation Type
    Analog / TTL
    Operating Temp. Range
    -10 to +40 °C
    Wavelength
    450nm, 520nm , 638nm
    Weight
    230g
    Typical Output Power at 25°C
    300 mW
    More info
    About 300 mW Micro RGB Laser Module
    This is compact and lightweight free-space laser module with multiple wavelengths.
    Wavelengths
    The laser module outputs three wavelengths:
    Channel R: 638nm (+5/-3nm)
    Channel G: 520nm (+10/-5nm)
    Channel B: 450nm (+/- 10nm)
    Wavelength tolerance can be changed for special order.
    Laser Beam
    The laser module outputs three laser beams which are overlapping. The dimensions of the laser beams are:
    Channel R: 1.6 x 1.0 mm @ 1/e2
    Channel G: 2.8 x 0.8 mm @ 1/e2
    Channel B: 3.0 x 1.2 mm @ 1/e2
    All of the beams are collimated. The divergence in the fast axis < 1.0mRad, the divergence is the slow axis <1.3mRad.
    Polarization
    The polarization state of each laser beam is the same, and it is TE-polarization.
    Optical Power
    Typical total optical power is 300 mW and minimal optical power is 280 mW.
    Dimensions
    The dimensions of the module are 44 x 39 x 27 mm. It is possible to mount the module on the base plate using four M3 screws.
    Laser Diode Driver
    The module is controlled by a three-channel driver
    (LPLDD-1A-16V-3CH)
    . Each channel is independently controlled by Analog or TTL input.
    The modulations up to 100 kHz is achievable. Modulation inputs can be used as a TTL inputs with its logic levels of 0 V and 5 V or as an analog input.
    Caution! Class 3B Laser !
    1. Only person with specialized training and appropriate laser safety knowledge can use and maintain the laser module. The laser module operator must be aware of laser radiation hazard.
    2. Laser radiation is dangerous even when scattered or reflected off a surface.
    3. Always use proper laser filter protection
    4. Never point lasers at people or animals.
    5. Do not stare at the beam, devastating and permanent eye damage can occur as a result of direct, diffuse or indirect beam viewing.
    Copyright © Opt Lasers | All Rights Reserved